Pro3000™ Tone and Probe Series
Key features
- Pro3000 Series Tone & Probe Kits tone and trace inactive wiring.
- Clear - Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
- Precise – SmartTone™ technology provides five distinct tones for exact pair identification
- Sends loud tone up to 10 miles (16 kilometers) on most cables
- Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
- Angled bed-of-nails clips allow easy access to individual pairs
- RJ-11 connector is ideal for use on telephone jacks
- Attach nylon pouch (included in kit) to your belt for easy transport
- product overview
- specifications
- What's in the box
Product overview: Pro3000™ Tone and Probe Series
The Pro3000™ Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.
The Pro3000™ toner’s patented SmartTone™ technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.
Specifications: Pro3000™ Tone and Probe Series
| Category | Specification |
|---|---|
| TONER SPECIFICATIONS | |
| User Interface | Slide switch (Continuity/Tone Mode), Push button (SOLID/ALT/OFF) |
| Tone Mode LED, Continuity/Polarity LED | |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000 / 1500 Hz nominal |
| Over Voltage Protection | 60 VDC in Toner/Polarity Mode |
| Output Power (Tone Mode) | 8 dBm into 600 ohms |
| Output Voltage (Continuity Mode) | 8 VDC with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20 °C to 60 °CStorage: -40 °C to 70 °C |
| Case Dimensions | 2.7 in x 2.4 in x 1.4 in (6.9 cm x 6.1 cm x 3.6 cm) |
| PROBE SPECIFICATIONS | |
| User Interface | ON/OFF push button, Volume dial, Replaceable tip, 3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20 °C to 60 °CStorage: -40 °C to 70 °C |
| Case Dimensions | 9.8 in x 1.6 in x 1.3 in (24.9 cm x 4.1 cm x 3.3 cm) |
What's in the box:
- Pro3000F Filtered Probe and Tone Generator